3M™ Particulate Respirator, 9502+N95

Description

3M™ Particulate Respirator, 9502+N95
Key Features
• NIOSH N95 and China KN95 approved
• Adjustable nose clip
• Vertical flat-fold style
Material Composition
• Straps – Polyurethane/Polyester fiber
• Nose Clip – Aluminum
• Filter – Polypropylene
• Coverweb – Polypropylene
• This respirator contains no components made from natural rubber latex
• Approximate weight of product: 7 grams
Country of Origin
Made in China
Use For
• Use for solid particulates and liquid mists in concentrations not exceeding 10X occupational exposure limits (OEL)
• Always follow User Instructions and use in manners as indicated
Do Not Use For
• Gases and vapors, oil aerosols, or abrasive blasting (unless physically separated from the blasting)
• Substances where local regulations require a different type of respirator
• Particulate concentrations exceeding 10X OEL or that are immediately dangerous to life or health (IDLH)
• Any manner not indicated in the User Instructions
Approvals and Standards
• NIOSH N95 and China KN95 particulate respirator
• Meets US NIOSH and China GB2626-2019 requirements for a minimum 95% filtration efficiency against solid and liquid aerosols that do not contain oil.
Time Use Limitation
Replace the respirator when it becomes dirty, damaged, or difficult to breathe through.
Shelf Life and Storage
• 5 years from the date of manufacture
• Date of manufacture on box in YYYYMMDD format
• Store respirators in the original packaging, away from contaminated areas, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals
• Store in temperatures between -4°F (-20°C) and +86°F (+30°C) and not exceeding 80% RH

WARNING!
This respirator helps reduce exposures to certain
airborne contaminants. Before use, the wearer
must read and understand the User Instructions
provided as a part of the product packaging.
Follow all local regulations. In the U.S., a written
respiratory protection program must be
implemented meeting all the requirements of
OSHA 1910.134, including training, fit testing and
medical evaluation. In Canada, CSA standard
Z94.4 requirements must be met and/or
requirements of the applicable jurisdiction, as
appropriate. Misuse may result in sickness or
death. For correct use, consult supervisor and the
User Instructions or call 3M PSD Technical Service
in USA at 1-800-243-4630 and in Canada at 1-
800-267-4414.
Acceptable Fit Test Protocols
*Refer to OSHA 1910.134
Fit Test Protocol* Acceptable with
this product?
Qualitative
Protocols
Saccharin ☒
BitrexTM ☒
Irritant
Smoke ☐
Isoamyl
Acetate ☐
Quantitative Protocols ☒
Personal Safety Division
3M